What are the characteristics of Hollow inductor and iron core inductor?

2020-07-31

1. In the case of the same number of turns and volume, the "inductive reactance" value of Hollow inductor is generally lower than that of solid inductor, Hollow inductor is more suitable for the occasion with wider frequency, and solid reactance has serious frequency tendency; also That is to say, the hollow inductive reactance allows most audio or audio frequencies to pass, while the solid inductive reactance is selective and only allows a part to pass.

                                                Hollow inductor

2. The reason for using these two kinds of inductances is mainly because of the needs of audio and audio frequency. In the frequency divider, hollow inductances are generally used in the front stage, theoretically allowing 20~20KHz audio to pass through. After the frequency division, only the audio signals after the frequency division are allowed to pass through 20~1KHz, 1K~10KHz, 10~20Hz, etc., so as to achieve the purpose of frequency division output. In fact, solid or Hollow inductors are There will be a lot of attention.


Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
©copyright 2009-2020 Perspective of Russia      Contact Us   SiteMap